ENGINEERED PROCESS EQUIPMENT · SINCE 1990
Technical library ↗فارسی
Pars Technic
Our capabilities

Verification throughout
the equipment lifecycle.

Material identification, fabrication oversight, inspection, and testing support conformance with the project requirements. The inspection scope and acceptance criteria are defined for the equipment and its intended service.

Industrial vessel fabrication from the equipment archive
Capability scope

Inspection & Testing expertise.

  • Material identification and traceability
  • Fabrication inspection activities
  • Testing aligned with the approved scope
  • Inspection and test records for handover
How it works

A hydrostatic test, step by step.

Pressure vessels built to ASME Section VIII, Division 1 are pressure-tested before they leave the shop. Run the test on the model: the gauges, the stress in the shell and the dial indicator all follow one calculation.

Gauge needles and dial indicator: what the test readsShell 1,000 × 10 mm, 3,000 mm T/T, 2:1 headsAn illustrative vessel designed for 16.0 bar g is tested with water at 1.3 times that pressure, 20.8 bar g (UG-99(b)). At test pressure the hoop stress in the 10 mm shell is about 105 MPa, 40 % of the plate's minimum yield, and the shell grows about 0.23 mm in radius, which the dial indicator at mid-span reads. Each vessel's test follows its own design data.
Project inputs

Connect the requirements
with the next step.

Share the available information with our team so we can evaluate the equipment scope and coordinate the work.

  • Design and fabrication requirements
  • Inspection and test plan
  • Acceptance criteria and witness points
  • Documentation and turnover requirements
Discuss a project
One connected workflow

Explore the full lifecycle.

01 / ENGINEERING

Engineering

Design decisions informed by the process duty, operating conditions, and project specification.

Explore capability 02 / MANUFACTURING

Manufacturing

Fabrication, welding, forming, and assembly coordinated around the approved design.

Explore capability 03 / INSPECTION

Inspection

Material controls, inspection activities, and testing aligned with project requirements.

Explore capability 04 / DELIVERY

Delivery

Equipment and documentation prepared for project handover and continuing support.

Explore capability
Let’s build what’s next

Your next project starts with a conversation.

Talk to our team